Your modem will be automatically installed. Use alone to test for OK result code. Shut down and restart your computer. Life in the slow lane: Click Start then click Control Panel. Turn on the modem. If you ever need to call our Technical Support department, you will need this number to receive assistance.

Uploader: Toran
Date Added: 13 October 2006
File Size: 39.58 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 52306
Price: Free* [*Free Regsitration Required]

Xmodem The first of a family of error control software protocols used to transfer files between modems.

USRobotics Support: Model – UK

ON if the modem receives a valid data signal carrier from a remote modem, indicating that data transmission is possible. The USRobotics modem you have installed should be present in the list of installed modems. D n Dials the specified phone number, includes the following: Get a 4-terabyte USB 3. Make sure the modem is plugged in and turned on. If your modem is still not working, refer to the additional troubleshooting in this Guide.

It is also referred to as transmission rate. Shut down your computer and connect the serial cable to the modem and the computer. Sets the duration, in hundredths of a second, that DTR must be dropped so that the modem does not interpret a random glitch as a DTR loss Most users will want to use the default This register is useful for setting compatibility with older systems running under older operating software.


You may be using a COM port that is either already in use or not configured correctly.

Protocols vary, but communicating devices must follow the same protocol in order to exchange data. Choose the Software option, and follow the on-screen instructions to install the ControlCenter software.

Plug one end of the provided phone cord into the jack on the modem and plug the other end into an analogue phone wall jack.

Starts playback of all stored messages, new and old. The phone socket you use must be for an analogue phone line. The receiving modem compares its results modek the received. Repeats the new message count. Retrieve your voice mail to restore your normal dial tone.

Limited warranty – parts and labor – lifetime – carry-in. Mobile by Morgan Little Oct 26, Make sure the modem is turned on and that the power supply rootics connected between the modem and the electrical outlet.

Sets the length, in millisecond units, of breaks sent from the modem to the computer; applies to MNP or V. Bit-mapped register setup To set the register, see the instructions for S13 Bit.


The ControlCenter software allows you to configure your V. Click Finish to complete the installation. Follow the on-screen instruct ions to register your modem and to view the warranty information. The second enhancement is Quick Connect, which permits quicker dial-up connections by allowing the modem to remember the line conditions of professoonal service provider that supports V.

Choose the Software option, select PhoneToolsand then follow the profeesional instructions to install PhoneTools software. It defines the signals and voltages used when data is exchanged between a computer and a modem or serial printer.

In order to achieve a V. I will choose the driver to install.

3Com US Robotics 56K Message Modem

Turn on the modem. On some modems, it includes four stored phone numbers and the modem settings. Discussion threads can be closed at any time at our discretion.